Snowflake #2 Ornament
Size: 2.5“ X 2.5“
Material: Semi-flexible clay (similar to a thick plastic keychain) with ink transfer sealed with a semi-gloss finish.
Each ornament comes signed and dated on the back.
All ornaments are 100% handmade and each contains a different unique charm. (You may not get the one pictured). Since all ornaments are handcrafted your ornament may have minor imperfections or inconsistencies that have no effect on the final product. (NOTE: I do complete a quality control before sending out) For more info on the process, read below.
Final ornaments are semi-flexible and scratch resistant and would make wonderful keychains. Although they are slightly flexible, I do NOT recommend bending. If being used as a keychain, I highly recommend using a clip, NOT a split ring.
About the process: 👇🏼
1.) Reference photo taken/found.
2.) Designs are sketched on an iPad, scaled to size, and printed.
2.) Clay is conditioned and rolled flat.
3.) Drawings are transferred onto clay with water.
4.) Paper is extremely carefully rubbed off with fingers.
5.) Ornament shape is cut out around the design.
6.) Ornament hole is poked.
7.) Clay is fired and then cooled.
8.) Excess paper residual is removed by soaking and scrubbing.
9.) Edges and back are sanded.
10.) Edges are buffed with gold.
11.) Backs are signed and dated.
12.) Sprayed with two coats of sealant.
13.) Unique charms are individually selected.
14.) Ribbon is cut and tied.
Size: 2.5“ X 2.5“
Material: Semi-flexible clay (similar to a thick plastic keychain) with ink transfer sealed with a semi-gloss finish.
Each ornament comes signed and dated on the back.
All ornaments are 100% handmade and each contains a different unique charm. (You may not get the one pictured). Since all ornaments are handcrafted your ornament may have minor imperfections or inconsistencies that have no effect on the final product. (NOTE: I do complete a quality control before sending out) For more info on the process, read below.
Final ornaments are semi-flexible and scratch resistant and would make wonderful keychains. Although they are slightly flexible, I do NOT recommend bending. If being used as a keychain, I highly recommend using a clip, NOT a split ring.
About the process: 👇🏼
1.) Reference photo taken/found.
2.) Designs are sketched on an iPad, scaled to size, and printed.
2.) Clay is conditioned and rolled flat.
3.) Drawings are transferred onto clay with water.
4.) Paper is extremely carefully rubbed off with fingers.
5.) Ornament shape is cut out around the design.
6.) Ornament hole is poked.
7.) Clay is fired and then cooled.
8.) Excess paper residual is removed by soaking and scrubbing.
9.) Edges and back are sanded.
10.) Edges are buffed with gold.
11.) Backs are signed and dated.
12.) Sprayed with two coats of sealant.
13.) Unique charms are individually selected.
14.) Ribbon is cut and tied.
Size: 2.5“ X 2.5“
Material: Semi-flexible clay (similar to a thick plastic keychain) with ink transfer sealed with a semi-gloss finish.
Each ornament comes signed and dated on the back.
All ornaments are 100% handmade and each contains a different unique charm. (You may not get the one pictured). Since all ornaments are handcrafted your ornament may have minor imperfections or inconsistencies that have no effect on the final product. (NOTE: I do complete a quality control before sending out) For more info on the process, read below.
Final ornaments are semi-flexible and scratch resistant and would make wonderful keychains. Although they are slightly flexible, I do NOT recommend bending. If being used as a keychain, I highly recommend using a clip, NOT a split ring.
About the process: 👇🏼
1.) Reference photo taken/found.
2.) Designs are sketched on an iPad, scaled to size, and printed.
2.) Clay is conditioned and rolled flat.
3.) Drawings are transferred onto clay with water.
4.) Paper is extremely carefully rubbed off with fingers.
5.) Ornament shape is cut out around the design.
6.) Ornament hole is poked.
7.) Clay is fired and then cooled.
8.) Excess paper residual is removed by soaking and scrubbing.
9.) Edges and back are sanded.
10.) Edges are buffed with gold.
11.) Backs are signed and dated.
12.) Sprayed with two coats of sealant.
13.) Unique charms are individually selected.
14.) Ribbon is cut and tied.
